Mandelia Insulation & Transmission Co.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Insulating Matting (Di-Electric Carpets) made of Rubber Compound suitable for providing the Electrical safety to the workmen working around the possible areas of Electrical shock and act as a safeguard equipment from electrical shock due to leakage of current, shot circuit or any other. The special high quality Rubber Compound ensures the complete shock protection against electrical shocks due to electrical earth faults.

Our Mats are fully compliant With IEC 61111 (International Electro Technical Commission) and are regularly tested by third like TUV, Lloyds and many others. The mats offered by us are ROHS and PAH Compliant.

Features And Advantages

• Fully tested to specification IEC 61111.
• Provides safety for operators against electrical shock.
• High Electrical Resistance Up to 50 KV/50000 volts.
• Suitable for both AC and DC Applications.
• Health and safety regulation Halogen Free flame retardant material.
• Highly Flexible mats with self-gripping design on floor.
• Anti-Fatigue type. Comfortable while standing for long period.
• Anti-Slip Finish. Tested to slip resist test.
• Resistant to acid, oil and Low temperature test.
• Ozone, UV and weather resistant.
• Permanent Marking-Durable and un-erasable done while curing of mats.
• Fully Traceable supply.
• Low Maintainance.
• No Recycled Rubber.

 

Dimensions

Note: Other colors also available on request.

Other Properties

We deliver rubber insulating mattings that are designed according to the ASTM-D-178 Standard. This standard is set by the American Society for Testing and Materials. The ASTM-D-178 Standard endorses a thickness of 3.2mm to 12.7mm for these particular mattings. It depends upon the smooth lower surface with the usage/working voltage resistance & antiskid textured surface on the top. Such safety rubber mattings (Type-1 Grade) are moisture, water & leakage proof that guarantee a long functional (work) life. A Type-2 Grade Insulating Mat contains certain additional properties such as Flame & Ozone resistance.

 

 

 

Standard Size & Design

1.0 Mtr Wide x 10.0 Mtr Long in Textured Design

Standard Colour

Black & Blue without Metallic Derivatives (Other colours available on request subject to availability)

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

We deliver rubber insulating mattings that are designed according to the ASTM-D-178 Standard. This standard is set by the American Society for Testing and Materials. The ASTM-D-178 Standard endorses a thickness of 3.2mm to 12.7mm for these particular mattings. It depends upon the smooth lower surface with the usage/working voltage resistance & antiskid textured surface on the top. Such safety rubber mattings (Type-1 Grade) are moisture, water & leakage proof that guarantee a long functional (work) life. A Type-2 Grade Insulating Mat contains certain additional properties such as Flame & Ozone resistance.

 

 

 

 

Standard Size & Design

1.0 Mtr Wide x 10.0 Mtr Long in Textured Design

Standard Colour

Black & Blue without Metallic Derivatives (Other colours available on request subject to availability)

We deliver rubber insulating mattings that are designed according to the ASTM-D-178 Standard. This standard is set by the American Society for Testing and Materials. The ASTM-D-178 Standard endorses a thickness of 3.2mm to 12.7mm for these particular mattings. It depends upon the smooth lower surface with the usage/working voltage resistance & antiskid textured surface on the top. Such safety rubber mattings (Type-1 Grade) are moisture, water & leakage proof that guarantee a long functional (work) life. A Type-2 Grade Insulating Mat contains certain additional properties such as Flame & Ozone resistance.

 

 

 

 

Standard Size & Design

1.0 Mtr Wide x 10.0 Mtr Long in Textured Design

Standard Colour

Black & Blue without Metallic Derivatives (Other colours available on request subject to availability)

Insulating Matting (Di-Electric Carpets) made of Rubber Compound suitable for providing the Electrical safety to the workmen working around the possible areas of Electrical shock and act as a safeguard equipment from electrical shock due to leakage of current, shot circuit or any other. The special high quality Rubber Compound ensures the complete shock protection against electrical shocks due to electrical earth faults.

Our Mats are fully compliant With IEC 61111 (International Electro Technical Commission) and are regularly tested by third like TUV, Lloyds and many others. The mats offered by us are ROHS and PAH Compliant.

Features And Advantages

• Fully tested to specification IEC 61111.
• Provides safety for operators against electrical shock.
• High Electrical Resistance Up to 50 KV/50000 volts.
• Suitable for both AC and DC Applications.
• Health and safety regulation Halogen Free flame retardant material.
• Highly Flexible mats with self-gripping design on floor.
• Anti-Fatigue type. Comfortable while standing for long period.
• Anti-Slip Finish. Tested to slip resist test.
• Resistant to acid, oil and Low temperature test.
• Ozone, UV and weather resistant.
• Permanent Marking-Durable and un-erasable done while curing of mats.
• Fully Traceable supply.
• Low Maintainance.
• No Recycled Rubber.

 

Dimensions

Note: Other colors also available on request.

Other Properties

Insulating Matting (Di-Electric Carpets) made of Rubber Compound suitable for providing the Electrical safety to the workmen working around the possible areas of Electrical shock and act as a safeguard equipment from electrical shock due to leakage of current, shot circuit or any other. The special high quality Rubber Compound ensures the complete shock protection against electrical shocks due to electrical earth faults.

Our Mats are fully compliant With IEC 61111 (International Electro Technical Commission) and are regularly tested by third like TUV, Lloyds and many others. The mats offered by us are ROHS and PAH Compliant.

Features And Advantages

• Fully tested to specification IEC 61111.
• Provides safety for operators against electrical shock.
• High Electrical Resistance Up to 50 KV/50000 volts.
• Suitable for both AC and DC Applications.
• Health and safety regulation Halogen Free flame retardant material.
• Highly Flexible mats with self-gripping design on floor.
• Anti-Fatigue type. Comfortable while standing for long period.
• Anti-Slip Finish. Tested to slip resist test.
• Resistant to acid, oil and Low temperature test.
• Ozone, UV and weather resistant.
• Permanent Marking-Durable and un-erasable done while curing of mats.
• Fully Traceable supply.
• Low Maintainance.
• No Recycled Rubber.

 

Dimensions

Note: Other colors also available on request.

Other Properties

Insulating Matting (Di-Electric Carpets) made of Rubber Compound suitable for providing the Electrical safety to the workmen working around the possible areas of Electrical shock and act as a safeguard equipment from electrical shock due to leakage of current, shot circuit or any other. The special high quality Rubber Compound ensures the complete shock protection against electrical shocks due to electrical earth faults.

Our Mats are fully compliant With IEC 61111 (International Electro Technical Commission) and are regularly tested by third like TUV, Lloyds and many others. The mats offered by us are ROHS and PAH Compliant.

Features And Advantages

• Fully tested to specification IEC 61111.
• Provides safety for operators against electrical shock.
• High Electrical Resistance Up to 50 KV/50000 volts.
• Suitable for both AC and DC Applications.
• Health and safety regulation Halogen Free flame retardant material.
• Highly Flexible mats with self-gripping design on floor.
• Anti-Fatigue type. Comfortable while standing for long period.
• Anti-Slip Finish. Tested to slip resist test.
• Resistant to acid, oil and Low temperature test.
• Ozone, UV and weather resistant.
• Permanent Marking-Durable and un-erasable done while curing of mats.
• Fully Traceable supply.
• Low Maintainance.
• No Recycled Rubber.

 

Dimensions

Note: Other colors also available on request.

Other Properties

Insulating Matting (Di-Electric Carpets) made of Rubber Compound suitable for providing the Electrical safety to the workmen working around the possible areas of Electrical shock and act as a safeguard equipment from electrical shock due to leakage of current, shot circuit or any other. The special high quality Rubber Compound ensures the complete shock protection against electrical shocks due to electrical earth faults.

Our Mats are fully compliant With IEC 61111 (International Electro Technical Commission) and are regularly tested by third like TUV, Lloyds and many others. The mats offered by us are ROHS and PAH Compliant.

Features And Advantages

• Fully tested to specification IEC 61111.
• Provides safety for operators against electrical shock.
• High Electrical Resistance Up to 50 KV/50000 volts.
• Suitable for both AC and DC Applications.
• Health and safety regulation Halogen Free flame retardant material.
• Highly Flexible mats with self-gripping design on floor.
• Anti-Fatigue type. Comfortable while standing for long period.
• Anti-Slip Finish. Tested to slip resist test.
• Resistant to acid, oil and Low temperature test.
• Ozone, UV and weather resistant.
• Permanent Marking-Durable and un-erasable done while curing of mats.
• Fully Traceable supply.
• Low Maintainance.
• No Recycled Rubber.

 

Dimensions

Note: Other colors also available on request.

Other Properties

Insulating Matting (Di-Electric Carpets) made of Rubber Compound suitable for providing the Electrical safety to the workmen working around the possible areas of Electrical shock and act as a safeguard equipment from electrical shock due to leakage of current, shot circuit or any other. The special high quality Rubber Compound ensures the complete shock protection against electrical shocks due to electrical earth faults.

Our Mats are fully compliant With IEC 61111 (International Electro Technical Commission) and are regularly tested by third like TUV, Lloyds and many others. The mats offered by us are ROHS and PAH Compliant.

Features And Advantages

• Fully tested to specification IEC 61111.
• Provides safety for operators against electrical shock.
• High Electrical Resistance Up to 50 KV/50000 volts.
• Suitable for both AC and DC Applications.
• Health and safety regulation Halogen Free flame retardant material.
• Highly Flexible mats with self-gripping design on floor.
• Anti-Fatigue type. Comfortable while standing for long period.
• Anti-Slip Finish. Tested to slip resist test.
• Resistant to acid, oil and Low temperature test.
• Ozone, UV and weather resistant.
• Permanent Marking-Durable and un-erasable done while curing of mats.
• Fully Traceable supply.
• Low Maintainance.
• No Recycled Rubber.

 

Dimensions

Note: Other colors also available on request.

Other Properties

Insulating Matting (Di-Electric Carpets) made of Rubber Compound suitable for providing the Electrical safety to the workmen working around the possible areas of Electrical shock and act as a safeguard equipment from electrical shock due to leakage of current, shot circuit or any other. The special high quality Rubber Compound ensures the complete shock protection against electrical shocks due to electrical earth faults.

Our Mats are fully compliant With IEC 61111 (International Electro Technical Commission) and are regularly tested by third like TUV, Lloyds and many others. The mats offered by us are ROHS and PAH Compliant.

Features And Advantages

• Fully tested to specification IEC 61111.
• Provides safety for operators against electrical shock.
• High Electrical Resistance Up to 50 KV/50000 volts.
• Suitable for both AC and DC Applications.
• Health and safety regulation Halogen Free flame retardant material.
• Highly Flexible mats with self-gripping design on floor.
• Anti-Fatigue type. Comfortable while standing for long period.
• Anti-Slip Finish. Tested to slip resist test.
• Resistant to acid, oil and Low temperature test.
• Ozone, UV and weather resistant.
• Permanent Marking-Durable and un-erasable done while curing of mats.
• Fully Traceable supply.
• Low Maintainance.
• No Recycled Rubber.

 

Dimensions

Note: Other colors also available on request.

Other Properties

Insulating Matting (Di-Electric Carpets) made of Rubber Compound suitable for providing the Electrical safety to the workmen working around the possible areas of Electrical shock and act as a safeguard equipment from electrical shock due to leakage of current, shot circuit or any other. The special high quality Rubber Compound ensures the complete shock protection against electrical shocks due to electrical earth faults.

Our Mats are fully compliant With IEC 61111 (International Electro Technical Commission) and are regularly tested by third like TUV, Lloyds and many others. The mats offered by us are ROHS and PAH Compliant.

Features And Advantages

• Fully tested to specification IEC 61111.
• Provides safety for operators against electrical shock.
• High Electrical Resistance Up to 50 KV/50000 volts.
• Suitable for both AC and DC Applications.
• Health and safety regulation Halogen Free flame retardant material.
• Highly Flexible mats with self-gripping design on floor.
• Anti-Fatigue type. Comfortable while standing for long period.
• Anti-Slip Finish. Tested to slip resist test.
• Resistant to acid, oil and Low temperature test.
• Ozone, UV and weather resistant.
• Permanent Marking-Durable and un-erasable done while curing of mats.
• Fully Traceable supply.
• Low Maintainance.
• No Recycled Rubber.

 

Dimensions

Note: Other colors also available on request.

Other Properties

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

Item Code: IS-15652-2006

Voltage Ratings:

• Class Thickness Grade KV Proof voltage B/Down voltage
• A 2.0 mm 3.3 10KV/3 minutes 30 KV
• B 2.5 mm 11 22KV/3 minutes 45 KV
• C 3.0 mm 33 36KV/3 minutes 65 KV

Construction:

Made from Highly Electrical resistant Elastomers, free from any insertions (includes rubbers, latex and Elastomeric compound that may be natural or synthetic or a mixture or a combination of both)

Surface: Upper surface of the mat is having small anti-skid aberration marks (rough surface, without edges) to avoid slippery effects and lower surface is plain.

Dimensions: Sizes are 1mtr x 2mtr or long length and thickness as per classification & designation

Working Temp: -10 to 55°C

Typical Features:

• Confirming IS: 15652/2006 (Latest), ISI marked.
• High Die Electric Strength Up to 65 KV.
• Insulation Resistance Up to 1494000 Mega Ohm.
• Fire Retardant.
• Good Mechanical Properties to with Stand Load and Movement of Breaker Trolleys and Associated Electrical Equipment including heavy foot traffic.
• No Adverse Effect of Acids, Alkalis and Transformer Oil.
• Manufactured Without Any Metallic Derivatives
• Suitable For Both A.C & D.C Electrical Installations
• Easy To Install, Can Be Pasted.
• Water And Moisture Proof, Does Not Decay.
• High Tensile Strength and Elongation Properties.

Application:

Safety from electrical shock is required for workmen whether they are involved in electricity generation, transmission, distribution or its use. These mats are highly recommended for total safety of workmen from electrical shock when working in or around environment like:

• High Voltage Panels
• Sub-station
• Power Transformer Rooms
• LT & HT Labs
• Near Bus bars
• Near Control Panels etc.

We deliver rubber insulating mattings that are designed according to the ASTM-D-178 Standard. This standard is set by the American Society for Testing and Materials. The ASTM-D-178 Standard endorses a thickness of 3.2mm to 12.7mm for these particular mattings. It depends upon the smooth lower surface with the usage/working voltage resistance & antiskid textured surface on the top. Such safety rubber mattings (Type-1 Grade) are moisture, water & leakage proof that guarantee a long functional (work) life. A Type-2 Grade Insulating Mat contains certain additional properties such as Flame & Ozone resistance.

 

 

 

 

Standard Size & Design

1.0 Mtr Wide x 10.0 Mtr Long in Textured Design

Standard Colour

Black & Blue without Metallic Derivatives (Other colours available on request subject to availability)

We deliver rubber insulating mattings that are designed according to the ASTM-D-178 Standard. This standard is set by the American Society for Testing and Materials. The ASTM-D-178 Standard endorses a thickness of 3.2mm to 12.7mm for these particular mattings. It depends upon the smooth lower surface with the usage/working voltage resistance & antiskid textured surface on the top. Such safety rubber mattings (Type-1 Grade) are moisture, water & leakage proof that guarantee a long functional (work) life. A Type-2 Grade Insulating Mat contains certain additional properties such as Flame & Ozone resistance.

 

 

 

 

Standard Size & Design

1.0 Mtr Wide x 10.0 Mtr Long in Textured Design

Standard Colour

Black & Blue without Metallic Derivatives (Other colours available on request subject to availability)

Insulating Matting (Di-Electric Carpets) made of Rubber Compound suitable for providing the Electrical safety to the workmen working around the possible areas of Electrical shock and act as a safeguard equipment from electrical shock due to leakage of current, shot circuit or any other. The special high quality Rubber Compound ensures the complete shock protection against electrical shocks due to electrical earth faults.

Our Mats are fully compliant With IEC 61111 (International Electro Technical Commission) and are regularly tested by third like TUV, Lloyds and many others. The mats offered by us are ROHS and PAH Compliant.

Features And Advantages

• Fully tested to specification IEC 61111.
• Provides safety for operators against electrical shock.
• High Electrical Resistance Up to 50 KV/50000 volts.
• Suitable for both AC and DC Applications.
• Health and safety regulation Halogen Free flame retardant material.
• Highly Flexible mats with self-gripping design on floor.
• Anti-Fatigue type. Comfortable while standing for long period.
• Anti-Slip Finish. Tested to slip resist test.
• Resistant to acid, oil and Low temperature test.
• Ozone, UV and weather resistant.
• Permanent Marking-Durable and un-erasable done while curing of mats.
• Fully Traceable supply.
• Low Maintainance.
• No Recycled Rubber.

 

Dimensions

Note: Other colors also available on request.

Other Properties

We deliver rubber insulating mattings that are designed according to the ASTM-D-178 Standard. This standard is set by the American Society for Testing and Materials. The ASTM-D-178 Standard endorses a thickness of 3.2mm to 12.7mm for these particular mattings. It depends upon the smooth lower surface with the usage/working voltage resistance & antiskid textured surface on the top. Such safety rubber mattings (Type-1 Grade) are moisture, water & leakage proof that guarantee a long functional (work) life. A Type-2 Grade Insulating Mat contains certain additional properties such as Flame & Ozone resistance.

 

 

 

 

Standard Size & Design

1.0 Mtr Wide x 10.0 Mtr Long in Textured Design

Standard Colour

Black & Blue without Metallic Derivatives (Other colours available on request subject to availability)